​FENCE HEIGHT OPTIONS
​1.2 m (1200mm) 
1.5 m (1500mm) 
1.8 m (1800mm) 
2.1 m (2100mm)

---

 HORIZONTAL LAMINATA fence is sold in 1.94m long sections. Each section consists of the following: 

• Twin 140 x 42mm H4 Posts (one each side of panels with spacer block at the bottom and infill at ends)

• 1795 x 280 x 42mm thick TG&V H3 panels 
• ​90 x 32mm H3 top capping & 160 x 40mm H3 post cap
• 80mm x 10g WURTH ZINC Nickle screws ​

---

Depending on your property gradient, there are two options
for contouring the fence tops to suit. The "stepped top section" is the most common. In some residential sub-divisions an "angled top section" may be a feature. 

---

If you are planning to have trees or gardens touching the fence then use a H4 treated bottom base board.  
​

---

MANUFACTURE

The factory assembled panels that make up the core of this system are a lamination of three offset layers of 14mm x 140mm boards. LOCTITE-PURBOND TM adhesive is applied to the board faces, then the assembly of transverse and longitudinal boards are pressed at high pressure until cured.

DURABILITY
All fence components are pressure treated using CCA. In ground components are treated to H4 (hazard class 4), all above ground components to H3.2 and independently tested in accordance with NZS3604.

The LOCTITE-PURBOND TM adhesive is approved for Service Class 3 and provides assurance of long-term performance, through resistance to hydrolysis, oxidation and thermal or microbial degradation.